I would like to join a company that has a work environment which recognize talent and fosters contribution by all employees as I want to grow and contribute towards the growth of the company.
A dynamic, versatile and progressive field operator with supervision skills with more than Ten(10) years of experience in the construction and oil and gas industry, who successfully use hand tools to repair, maintain, operate and install structures, spools, fittings/ valves and coating plant. I am hardworking and respectful
Overview
5
5
years of professional experience
1
1
Certification
Work History
FABRICATOR/ PIPE FITTER AND TECHNICIAN
ORSAM ENERGIES (FRIEDLAND ORTECH GROUP, GHANA)
03.2018 - 03.2022
Performing Authority
Viewing through and ensures that work party understand the Task Risk Assessment(TRA), TOOLS BOX TALK(TBT) and Hazards regards to every particular job on the field
Assisting surveyor to process data Automatically/ manually by clustering them for successful verification and registration scan
Assist surveyor to scan all engine room production and emergency pipe that are in bad condition with the use of class 3D laser1 scanning machine
Optimize the whole process data to get high quality pictures
Reports to project manager regards to daily task being performed
Ability to interpret and understand P&ID's, PFD's and other engineering drawings
Ensures that workplace is clean, free from obstacles and in a safe condition before, during and after work
Installation of sea water injection pump lifting frame
Changing and installation of new emergency foam spool pipes and all production pipelines being corroded on the FPSO KNK
Fabricating, changing and installation of new gratings to replace old ones that are in bad condition
Hot bolting
Participating in fire watching where there is an ongoing hot work operation
Maintaining effective communication with all work parties
Able to work without supervision Following and implementing work procedures
MODEC GHANA INC AND AMERICAN BUREAU OF SHIPPING / ORS MAINTENANCE AND SURVEY PROJECT
Repair and maintenance of all mechanical job on deck
Responsible for all welding job onboard, Plasma cutting, Arc & gas and metal fabrication works
Reading isometric drawing, taking measurement, fabricating and installing piping efficiently
Assembling and secure pipes, tubes, fittings and related equipment according to specifications by welding and treading joints
Operating mobile overhead cranes to lift, transfer and lower heavy duty equipment, materials and 3LPP pipes with the use of slings, chain blocks, shackles, hooks, cables and other rigging equipment
Operate pipe facing machine (PFM) to bevel 3LPP pipes per standard of the client for welding
Using offset gauge, caliper and scriber to check for the required beveling radius, nib thickness and making out for scan after welding
Installation of anodes on 3LPP pipes
Fire watch
Ensures that all deck working areas are kept clean, safe and free from obstacles before, during and after work
Comply and abide by company safety rules and procedures to ensure safe operations are undertaking
Cleaning and maintenance of tools and equipment being used at the workshops after every shift
Adhered to all applicable laws, regulations, policies and procedures for health, safety and environmental compliance
Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to work pieces
Measure and marked dimensions and reference point accurately
Dismantle and inspect components and adjusted and repaired them as necessary
Inspect sample work pieces to verify conformance with specifications, using instruments such as gauges, micrometers, calipers, templates, ruler and dial indicators
Comprehend and complete the task with limited supervision and training
Start lathe or turning machine and observe operations to ensure that specifications are met
Responsible, hardworking and collaborate with team members to produce quality work on tight deadlines
Study blueprint, layout or charts and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences
MAINTENANCE TECHNICIAN
Twifo Praso Oil Palm Plantation
10.2019 - 11.2021
Conducted routine inspections to identify and address maintenance issues promptly.
Performed preventive maintenance on equipment to ensure optimal functionality and reduce downtime.
Troubleshot electrical, plumbing, and HVAC systems to resolve complex technical problems efficiently.
Collaborated with team members to develop and implement maintenance schedules, improving workflow efficiency.
Operated varied hand and power tools to complete repairs.
Troubleshot equipment breakdowns and performed preventive maintenance.
Used problem-solving skills to alleviate issues efficiently with minimal supervision.
Followed work orders and specifications for machine and equipment replacement, repair, or maintenance.
Followed safety protocols to minimize workplace accidents.
FABRIC MAINTENANCE TECHNICIAN
ZEAL ENVIRONMENTAL TECHNOLOGIES LIMITED
02.2018 - 04.2018
Secure barricade at the worksite
Conduct tools box talk to all work parties participating and highlight the work scope, hazards and risk involve
Setup all working equipment (chipping gun, grinders, bristle blaster, hoses and power brushes
Preparing of area to be painted which consist of chipping corrosion defects, wire cup comers and welds, buffing and keying existing topcoat
QC prepare work thoroughly before wash down
Apply spot primer and intermediate primer in relation to their respective times
Apply topcoat
Used wet film thickens and dry film thickness gauge
Used surface profile gauge to execute our task
Tightening and tugging of bolt and nuts Supply of bolt and nuts for a specific steel
MAERSK VIKING, DRILLSHIP
PIPE COATING OPERATOR/ RIGGER
TENARIS / AMAJA TUBULAR SERVICE LIMITED (ATSL)
03.2017 - 12.2017
Concrete weight pipe coating operator
Viewing job safety analysis (JSA/TBT) and following procedures of the task
Rigging and lifting of 3LPE and concrete coated pipes
Painting, checking and preparing of final cosmetics on concrete weight coated pipes before stacking
Measuring and preparing concrete weight coated pipes for curing
Stripping and repairing of major/minor non-impact on concrete weight pipes after curing
Testing coated pipes for standard compression and compactness
Testing anodes for effective influx of electrical polar
Inspecting of holes, grease and dirt with the use of holiday inn detector on 3LPE coated pipes before conveying it to the application point
Checking for required OD and weight of concrete coated pipe to meet the client standard
Assisting in maintenance and servicing of production plant at site
Keeping the workplace in an organize, clean and safe condition
ENI GHANA DEVELOPMENT EXPLORATION PROJECT- OFFSHORE CAPE THREE POINT(OCTP)
Education
Certificate of Proficiency I Trade Test - Mechanical Engineering Grade One Level
National Vocational Training Institute
Takoradi
01.2019
Certificate of Proficiency II Trade Test - Mechanical Grade Two Level
National Vocational Training Institute
Takoradi
01.2020
Higher National Diploma(HND) - Mechanical Engineering (PLANT OPTION)
Certificate of Proficiency I Trade Test - Mechanical Engineering Grade One Level
National Vocational Training Institute
Certificate of Proficiency II Trade Test - Mechanical Grade Two Level
National Vocational Training Institute
Higher National Diploma(HND) - Mechanical Engineering (PLANT OPTION)
Accra Technical University
Mechanical Engineering Technician - NABPTEX
Takoradi Technical Institute
Personal Information
Health Status: Fit to Work
Title: Mechanical Technician, Rigger, Welder/fabricator, Pipe fitter/fabricator, Pipe facing operator, Pipe coating operator, Plumber, Tank Cleaner, Painter and Fire watch
Date of Birth: 27/07/1996
Nationality: Ghanaian
Career Development Trainings
H2S Training
Certificate for Basic Offshore Safety Induction And Emergency Training BOSIET (Include: Safety Induction, Sea survival, HUET with CA-EBS, Basic firefighting & Self rescue, Emergency First Aid)
Offshore medical certificate
Certificate of Proficiency in Personal Safety & Social Responsibilities
Certificate of Proficiency for Seafarers with Security Awareness and Designated Security Duties
Certificate of Proficiency in Personal Survival Techniques
Certificate of Proficiency in Elementary First Aid
Certificate of Proficiency in Fire Prevention and Fire-Fighting
Sea Service Certificate
Certificate of Achievement for 'Making A Difference Award' on-board the SEVEN BOREALIS
Certificate As Performing Authority (PA)
Certificate of examination (RIGGING SLINGING AND BANKSMAN LEVEL 1)
Certificate of Reassessment and Refresher Program (International Minimum Industry Safety Training)
Certificate for Spillage Awareness Training
Certificate for Working at height Safety Induction
Certificate for COSHH and working in confined spaces
Certificate for Subsea7 corporate HSEQ induction for operational site
Certificate for Subsea7 permit to work operational Certificate for Subsea7 Environmental awareness
Certificate for Subsea7 Task Risk Assessment
Certificate for Subsea7 Manual Handling
Certificate for Subsea7 critical safety behaviors
Certificate of Appreciation (Tullow Ghana Jubilee Project/ Subsea 7)
Certificate of Crew Performance Appraisal
Certificate of Excellence for Outstanding performance as Pipe Coating Operator on (OCTP GHANA DEVELOPMENT PROJECT)