Summary
Overview
Work History
Education
Skills
Certification
Timeline
Generic

REUBEN QUAYE

OBUASI

Summary


Control, Instrumentation and Automation technologist, technician and mechanic specialize in troubleshooting, repairing and maintenance of instruments and instrumentation, automation and industrial network systems with 10 years’ experience working in fast-paced industrial (Cement manufacturing and Mining) environments.

Overview

10
10
years of professional experience
1
1
Certification

Work History

Comm, Instrumentation & Control Supervisor

Angogold Ashanit Limited (AGA)
Obuasi
03.2024 - Current
  • Adhere to site's Environmental Management Plan. Gather information for the CIC Superintendent – Surface Mine Infrastructure Execute Instrumentation refurbishment, later maintenance, work and carry out checks on a routine scheduled basis.
  • This include visual checks, electrical integrity checks, verification of output within calibration and specification;
  • Coordinate all Instrumentation refurbishment, later maintenance Control and verify correctness of all work carried out on Safely on Radio and control System installation
  • Conduct reviews of the refurbishment, later maintenance, of the Instrumentation equipment to identify actions for continuous improvement
  • Assist the CIC Superintendent – Surface Mine Infrastructure to develop condition monitoring routes and checks for correct functioning equipment;
  • Propose cost savings projects
    • Execute work in a timely manner; coordinate refurbishment work contractors to time plan, escalate real or potential delays
    • Monitor equipment performance on asset health system and take proactive measures to address symptoms of potential failure.
    • Report directly to the Superintendent on issues and identify and execute improvement projects
    • Stop equipment from working if there exists a high risk or unsafe to be used.

Instrumentation, Control and Communication Tech

Anglogold Ashanti Ltd
Obuasi
03.2020 - Current
  • Tested and troubleshot instruments, components and assemblies using circuit testers and voltmeters.
  • Removed damaged components and instrument systems to complete repairs or replace parts.
  • Cleaned instruments and completed minor adjustments to improve functioning.
  • Performed diagnostics and root cause analysis to evaluate malfunctions.
  • Utilized knowledge of mathematics and algebra to scale and calibrate process instrumentation.
  • Installed, programmed and adjusted electrical and mechanical pressure transmitter,valves and controllers.
  • Guided technical team and personnel in operations and provided suggestions to improve service.
  • Observed installed systems to detect hazards and determine need for adjustments or modifications.
  • Examined on-site electrical systems and equipment to identify faults and devise design corrections.
  • Performed diagnostics and testing to locate root causes and resolve issues for optimal performance.
  • Maintained system logs or manuals to document testing or operation of equipment.
  • Handled trouble calls on production and processing equipment and facilities.
  • Developed, implemented and optimized automation improvements for both hardware and software platforms.
  • Prepared engineering sketches or specifications for construction, relocation or installation of equipment or systems.
  • Assembled and tested components, wiring and systems, locating and correcting faults to optimize production results.
  • Evaluated machine and process control requirements to develop device controller specifications.
  • Constructed and tested electronic circuits and installed point-to-point wire harnesses and connectors.
  • Inspected newly installed equipment to adjust operating problems.
  • Checked conformance to engineering principles and design specifications.
  • Evaluated project work to verify effectiveness, technical adequacy or compatibility in resolution of complex electronics engineering problems.
  • Worked with engineers to troubleshot and resolve testing failures.
  • Improved electrical installations by standardizing procedures for production and field personnel.
  • Tested performance of in-development parts, assemblies and systems under simulated operating conditions to optimize plans.
  • Maintained strict maintenance schedules for critical systems and accurately logged repairs and inspections in [Allen bradley plc]
  • Tested and troubleshot instruments, components and assemblies using circuit testers, oscilloscopes and voltmeters.
  • Recommended and initiated modifications to mitigate risks and achieve design compliance.
  • Manipulated computer-aided design software to produce electronics drawings and graphics for industrial control.
  • Performed troubleshooting using P&ID system diagrams and electrical schematics.
  • Conducted routine inspections on devices.

Acting Control, Instrumentation & Comm. Supervisor

Anglogold Ashanti Ltd
Obuasi
12.2021 - 01.2022
  • Adhere to site’s Environmental Management Plan.
  • Gather information for the CIC Superintendent – Surface Mine Infrastructure
  • Execute Instrumentation refurbishment, later maintenance, work and carry out checks on a routine scheduled basis. This include visual checks, electrical integrity checks, verification of output within calibration and specification;
  • Coordinate all Instrumentation refurbishment, later maintenance
  • Control and verify correctness of all work carried out on Safely on Radio and control System installation
  • Conduct reviews of the refurbishment, later maintenance, of the Instrumentation equipment to identify actions for continuous improvement
  • Assist the CIC Superintendent – Surface Mine Infrastructure to develop condition monitoring routes and checks for correct functioning equipment;

Electrical & Instreumention Technician (shift)

Ghacem ltd
Takoradi
09.2015 - 03.2020
  • Installed electrical wiring during remodeling projects.
  • Repaired electrical equipment using hand and power tools and testing and diagnostic equipment.
  • Interpreted electrical and mechanical schematics, blueprints and diagrams.
  • Tested energized and de-energized circuits, following test procedures and assisted in specialized test procedures.
  • Connected and repaired equipment based on mechanical drawings and electrical prints.
  • Tested and repaired electric motors, variable frequency drives, alarms and control systems.
  • Provided electrical services and control wiring for diverse locations.
  • Performed monthly, semi-annual and annual Preventive Maintenance Checks and Services (PMCS).
  • Maintained inventory of parts for immediate and emergency repairs.
  • Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain uptime.
  • Maintained accurate electronic and instrument inventory to support safe and efficient operation.
  • Trained maintenance journeymen electricians and electrical apprentices.
  • Kept permits, isolation tags and logs current at all times.
  • Maintained electrical and mechanical components of gas and diesel engine-driven generators.
  • Reviewed line drawings to locate and splice buried fiber optic cables.

National Service Personel

Ghacem
Takoradi
08.2014 - 08.2015
  • Put in new new electrical components, fixtures and motors.
  • Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
  • Maintained organization, cleanliness and safety in work areas.
  • Measured and prepared supplies for electrical tasks.
  • Reviewed blueprints and electrical schematics to perform tasks to specifications.
  • Adhered to company standards and OSHA regulations for work site safety.
  • Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
  • Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
  • Inspected existing wiring to identify short circuits.
  • Kept work areas clean, neat and organized for efficient operations.
  • Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Resolved issues with existing systems and replaced malfunctioning parts.
  • Built controllers and panels to complete system installations.
  • Set up equipment and configured settings for optimal performance.

Education

BACHELOR oF TECHNOLOGY (B-TECH) - ELECTRICAL AND ELECTRONICS ENGINEERING

KUMASI TECHNICAL UNIVERSITY
08.2019

HIGHER NATIONAL DIPLOMA - ELECTRICAL AND ELECTRONIC ENGINEERING

KUMASI TECHNICAL UNIVERSITY
08.2015

Skills

  • Work with Distributed Control Systems (DCS)
  • Good in Supervisory Control and Data Acquisition systems (SCADA)
  • Schematic reading
  • Preventive maintenance
  • Troubleshooting skills
  • Computer user assistance
  • Technical issue resolution
  • Equipment maintenance
  • Software troubleshooting
  • Knowledge in Programmable Logic Controllers
  • Quality testing
  • Component assembly
  • Safety and compliance

Certification

  • Certified Mineral commission (MINCOM) Inspecting Technician
  • INDUSTRIAL CONTROLS - TRAINING AND MAINTENANCE ENGINEERING SERVICES -2021
  • BASIC RIGGING AND SLINGING - GLOBAL HEALTH AND SAFETY GROUP SOLUTION] - 2021
  • BASIC CRANE OPERATION - GLOBAL HEALTH AND SAFETY GROUP SOLUTION - 2021
  • HMI PROGRAMMING & DESIGN -FACTORYTALK VEIW ME SCADA PLC - UDEMY 2022
  • ALLEN BRADLEY PLC PROGRAMING, STUDIO 5000 SERIES- UDEMY 2022
  • INDUSTRIALINSTRUMENTATION AND CONTROL DEVIVES UDEMY 2022
  • ELECTRICAL MOTOR AND CONTROL MAINTENANCE - IMPERIAL COLLEGE OF MINES AND SAFETY -2018

Timeline

Comm, Instrumentation & Control Supervisor

Angogold Ashanit Limited (AGA)
03.2024 - Current

Acting Control, Instrumentation & Comm. Supervisor

Anglogold Ashanti Ltd
12.2021 - 01.2022

Instrumentation, Control and Communication Tech

Anglogold Ashanti Ltd
03.2020 - Current

Electrical & Instreumention Technician (shift)

Ghacem ltd
09.2015 - 03.2020

National Service Personel

Ghacem
08.2014 - 08.2015

BACHELOR oF TECHNOLOGY (B-TECH) - ELECTRICAL AND ELECTRONICS ENGINEERING

KUMASI TECHNICAL UNIVERSITY

HIGHER NATIONAL DIPLOMA - ELECTRICAL AND ELECTRONIC ENGINEERING

KUMASI TECHNICAL UNIVERSITY

Similar Profiles

CREATE PROFILE
REUBEN QUAYE