Summary
Overview
Work History
Education
Skills
Safetytrainingandworkshopsattended
References
Timeline
Generic

Reuben Adjei Mensah

Accra

Summary

Innovative technology professional with several years of diverse experience. Skilled in enhancing systems and aligning technical solutions with business objectives. Proven success in leading projects from start to finish and contributing to organizational growth and success.

Overview

12
12
years of professional experience

Work History

Assistant Electrical and Automation Engineer

Electricity Company of Ghana (ECG)
11.2022 - Current
  • Carry out routine tests on protective devices like relays and high-voltage switchgear.
  • Manage and supervise SCADA projects
  • Assist in the building of Industrial Electrical Panels (Power and Controls)
  • Design an appropriate protection scheme for an Electrical Network
  • Design a SCADA system for the High Voltage Electrical Network
  • Perform End to end Test (Sub Station to Control Center) with contractors
  • Perform Operations on the High Voltage Electrical Network at the Substation.

Electrical and Electronic Engineer, Sales Engineer, and PLC Programmer

Alpha Mechatronics Company Ltd (AMCL)
12.2020
  • Occasionally works on valves and actuators
  • Occasionally Test, Calibrate, install, inspect and even repair various monitoring devices
  • Assist in the building of Industrial Electrical Panels (Power and Controls)
  • Drawing and designing of Electrical and Electronic Schematic Circuit Using Eplan Electric P8 and Proteus
  • Programming of PLC’s and Drives on site or at work place
  • Assist in designing and Programming of Human Machine Interface (HMI)
  • Assist in testing of Electrical Components and does QA/QC
  • Troubleshooting and repairing of PLC’s if any PLC fault or problems occur
  • Assist in production duties if called upon
  • Assist in designing of any machine part or components using SolidWorks
  • Work on High Voltage and Low Voltage Panels on site.

Electrical Technician and Control Panel Designer

Process and Plant Automation (PPA)
02.2017 - 11.2020
  • Assist in the building of Industrial Electrical Panels (Power and Controls)
  • Drawing and designing of Electrical and Electronic Schematic Circuit Using Eplan Electric P8 and Proteus
  • Programming of PLC’s and Drives on site or at work place
  • Assist in designing and Programming of Human Machine Interface (HMI)
  • Assist in testing of Electrical Components and does QA/QC
  • Assist in wiring of the internal and external part of the Electrical Panel
  • Troubleshooting and repairing of PLC’s if any PLC fault or problems occur
  • Assist in production duties if called upon
  • Assist in installation of new Industrial Lightings
  • Assist in designing of any machine part or components using SolidWorks.

Industrial Internship

Volta River Authority of Ghana
06.2015 - 08.2015
  • Assist in preparation of daily, weekly, monthly report
  • Assist in daily inspection of Distribution systems (Preventive Maintenance)
  • Assist in plan and arrange tools and materials for any maintenance work
  • Assist in installation, maintenance and operations of distribution substation equipment’s
  • Assist in troubleshooting in electrical and control equipment
  • Assist in preparing of Earthing system and performing soil resistivity test/earth electrode test at Distribution substations
  • Assist in transformer maintenance; day and night load monitoring at substations
  • Assist in pre-commission test of distribution transformers
  • Assist in 11kV/415V overhead lines Constructing, Stringing and maintenance works
  • Assist in installation, maintenance and operations of air break isolators (A.B.I)
  • Assist in responding, and solving faults and complainants from customers
  • Assist in installation of single and three phase energy meters
  • Assist in replacement of faulty and burnt energy and electronic meters
  • Assist in streetlight installation and repairs
  • Assist in performing transformer oil treatment test, for distribution transformers.

Industrial Internship

Electricity Company of Ghana
06.2014 - 08.2014
  • Assist in maintenance of various distribution transformers in the district
  • Assist in 33kV/415V overhead lines Construction, and Stringing of the lines
  • Assist in installation of 33kV Transformer, Surge arrestors, Drop out fuses and 415 Cartridge fuses.

Electrical and Electronic Technician

Nexans kabelmetal Ghana Ltd
10.2012 - 10.2013
  • Assist in maintenance of electrical gadget and Industrial wiring (installation)
  • Assist in the installation of Cable Extrusion Machine in the plant
  • Assist in production duties if called upon
  • Assist in installation of new Industrial Lightings.

Electrical and Electronic Technician

Fine Print Industries LTD
09.2012 - 10.2012
  • Assist in maintenance in electrical gadget and house wiring (installation)
  • Assist in Troubleshooting of Electrical Panels
  • Assist in machine maintenance.

Education

B.Sc. in Electrical and Electronic Engineering - Electrical Engineering

Regional Maritime University
Accra, Ghana
09.2020

HND in Electrical and Electronic Engineering - Electrical Engineering

Koforidua Technical University
Eastern Region, Ghana
06.2016

Electrical and Electronic Engineering Technician Part I - Electrical, Electronics Engineering Technologies

Kukurantumi Institute of Technology
Eastern Region, Ghana
06.2009

Electrical Installation Work - Electrical And Power Transmission Installation

Saint Paul Technical Institute
Eastern Region
05.2008

Skills

Computer literate skills include (Microsoft Office, Excel, Word, PowerPoint, Multisim, Circuit Wizard, Proteus, AutoCAD, and Solid Works, a little knowledge about SCADA, C/C programming, and Arduino microcontroller programming

  • Ability to work around many instrumentation devices, test, calibrate, inspect, and repair some monitoring devices if possible
  • Very good Programmer of Delta PLC’s DVP series
  • Very good Programmer of Siemens Programmable Logic Controllers (PLC), S7 200, 300, 400, 1200, 1500
  • Certified Allen Bradley PLC Logix 5000 Programmer (Module1 and Module2)
  • Certified Allen Bradley PLC RSLogix 500 Programmer (Level 1 and Level 2)
  • Able to design Electrical Schematics and troubleshoot as well
  • Able to use EPLAN CAD to design control and power circuits
  • Able to design, read, and assemble electronic components to form a specific circuit
  • Machine Parts Designer Using SolidWorks 3D CAD Software
  • Able to design 2D and 3D Models using AutoCAD
  • Ability to operate HIGH VOLTAGE (HV) Switchgears both remotely and Locally
  • Ability to read and understand P&ID
  • Able to perform FAT and SAT for both vendor and end user
  • Programming and Repairing of Variable Frequency Drives (VFD)
  • Able to design an MCC Panel with VFDs and motor starters
  • Programming of Human Machine Interface (HMI)
  • Good interpersonal relationships with people, andteamwork to achieve thecompany’s goals and objectives
  • Good communicator and ability to learn fast
  • Strong decision-making skills and ability to prioritize and plan effectively
  • Love to work around CAD Software and can learn CAD software faster
  • Love training people for the knowledge acquired and love to be trained as well
  • Willing to be called out for emergency
  • Punctual and well presented to work
  • Able to work under pressure
  • Very Versatile Person

Safetytrainingandworkshopsattended

  • 06/14/2015, Personal conduct, Volta River Authority
  • 06/21/2015, Manual lifting, Volta River Authority
  • 06/28/2015, Apparatus to be treated as live, Volta River Authority
  • 07/05/2015, Protection for work, Volta River Authority
  • 07/12/2015, Standard portable grounding device, Volta River Authority
  • 07/19/2015, Use of safety rope, Volta River Authority
  • 07/26/2015, Prohibition of an employee working alone, Volta River Authority
  • 08/09/2015, Climbing pole precautions, Volta River Authority
  • 08/16/2015, Good housekeeping, Volta River Authority
  • 08/23/2015, Cardio Pulmonary Resuscitation (C.P.R), Volta River Authority

References

  • Mr. Mark Abbey, Fmr. District Manager, Electricity Company of Ghana, North Ridge, Accra, 0244065159
  • Mr. Julius Kofi Danquah, Electrical Engineer, The Automation Ghana Group, 0243577037, 0509522586
  • Mr. Seth Bortier Tawiah, Operation Support and Power Specialist, Ghana International Airport, Accra, 020-400700, 0548539200

Timeline

Assistant Electrical and Automation Engineer

Electricity Company of Ghana (ECG)
11.2022 - Current

Electrical and Electronic Engineer, Sales Engineer, and PLC Programmer

Alpha Mechatronics Company Ltd (AMCL)
12.2020

Electrical Technician and Control Panel Designer

Process and Plant Automation (PPA)
02.2017 - 11.2020

Industrial Internship

Volta River Authority of Ghana
06.2015 - 08.2015

Industrial Internship

Electricity Company of Ghana
06.2014 - 08.2014

Electrical and Electronic Technician

Nexans kabelmetal Ghana Ltd
10.2012 - 10.2013

Electrical and Electronic Technician

Fine Print Industries LTD
09.2012 - 10.2012

B.Sc. in Electrical and Electronic Engineering - Electrical Engineering

Regional Maritime University

HND in Electrical and Electronic Engineering - Electrical Engineering

Koforidua Technical University

Electrical and Electronic Engineering Technician Part I - Electrical, Electronics Engineering Technologies

Kukurantumi Institute of Technology

Electrical Installation Work - Electrical And Power Transmission Installation

Saint Paul Technical Institute
Reuben Adjei Mensah