CALEB K. AKWANDOH
Bibiani
Summary
Safety-conscious Maintenance Engineer, Electro- Mechanical Electrician with sound knowledge of OSHA regulations and ISO. Familiar with DC power and control systems, PLC, specialists in Auto Air Condition system, and branch circuit wiring. Hardworking and efficient with the ability to learn quickly. Organized employees with a strong work ethic and a terrific job attendance record. Highly communicative and offering great problem solving skills and Results-focused, looking for opportunity in Energy, Oil and Gas, and mining industry, to grow and become Engineering manager or CEO for more challenge environment, to work professional with strength in Maintenance management and technically problems solving. Proactive leader with strengths in communication and collaboration. Proficient in leveraging planning and troubleshooting knowledge to promote TPM and the OEE. Adept at managing concurrent objectives to promote efficiency and influence positive outcomes. To seek and maintain a full-time position that offers professional challenges utilizing interpersonal skills, excellent time management. High-performing professional with substantial experience developing and implementing safety and health programs. Creates safety protocols, and conducts hazard assessments. Strong knowledge of OSHA regulations and committed to promoting industrial hygiene and environmental health. Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals.
Detail-oriented Auto Electrician familiar with performing electrical maintenance on vehicles and equipment. Adept at troubleshooting and repairing equipment failures, diagnosing and replacing parts and checking battery performance, starters performance and alternator charging conditions. Reliable and punctual with thirteenth years of experience.
Overview
19
19
years of professional experience
Work History
Underground Auto Electrician (HMUE) + Maintenance Safety Rep.
KINROSS Chirano Gold Mines Limited
2021.01 - Current
- Troubleshooting and fault finding all Heavy duty equipment using Electronic Diagnosis Equipment for any equipment
Ensuring that effective maintenance standards are implemented in compliance with ISO14001 and OHSAS18001 requirement
Repair and overhaul alternators including replacement of coils, resistors and diode plates
Test alternators using test bench
Re-hosing and fixing compressors, evaporators, condensers, dryers, and all air condition systems
Overhauling, repairing and servicing of air condition, including stripping of compressors, replacing faulty components i.e
Bearings, seals, pulleys, coils etc
Completion and return of all planning and scheduling documentation to maintenance planning to ensure all planning, scheduling, backlog and history are maintained to monitor asset status
Completion of all daily inspection and various component condition monitoring templates as required
Troubleshot equipment breakdowns and performed preventive maintenance
Assembly of starter motor, alternators and others
Inspected mine sites to maintain structural, equipment and project safety and protect workers
Conducted safety meetings to improve internal safety processes
Established best practices in workplace safety and environmental quality programs with corrective action plans
Implemented procedures and practices for site employees to protect workers
Investigated workplace accidents and injuries to determine root causes
Determined root causes of accidents via in-depth investigations and identified potential prevention strategies to mitigate future risk.
Enhanced vehicle performance by diagnosing and repairing complex electrical issues in various makes and models.
- Ensured compliance with safety regulations by following established protocols during repair procedures.
Health and Safety Representative
African Mining Services, AMS
2011.01 - 2021.01
- Inspected mine sites to maintain structural, equipment and project safety and protect workers
Conducted safety meetings to improve internal safety processes
Established best practices in workplace safety and environmental quality programs with corrective action plans
Determined root causes of accidents via in-depth investigations and identified potential prevention strategies to mitigate future risk
Educate new employees in proper safety procedures to minimize accidents with proper behaviors
Inspected or evaluated workplace environments, equipment or practices to verify compliance with safety standards and government regulations
Recommended measures to help protect workers from potentially hazardous work methods, processes or materials
Resolved interpersonal conflicts by listening, finding common ground and building relationships
Demonstrated leadership by making improvements to work processes and helping to train others.
Ensured compliance with OSHA regulations through regular audits and corrective action plans.
Collaborated with management to establish strong safety culture throughout organizatio
Assisted in accidents and near-misses, identifying root causes recommending preventive measures.
Leading Hands (Rigs) Auto Electrician (HME) + Safety |Representative
African Mining Services (AMS) Limited
2015.01 - 2021.01
- Maintenance Technician as (Auto Electronic and electronic Technician / Auto Air Condition Specialist)
Troubleshooting and fault finding all Heavy-duty equipment using Electronic Diagnosis Equipment tool for any equipment or machines
Rectification work is carried out following workshop manuals
Trainer and managing electrical team as well as auto electrical trainn to implement
Works using equipment drawings and manuals, using spare part lists
Information to ensure that correct parts or adequate substitute are installed
Overhaul, repair and service air condition, including stripping of compressors, replacing faulty components examples
Bearings, seals, pulley’s coils, etc
Replacing condensers, evaporators, dryers and thermostats
Completion and return of all planning and scheduling documentation to maintenance planners to ensure all planning, scheduling, backlog, and history are maintained to monitor asset status
Completion of all daily inspection and various component condition monitoring templates as required
Repair and overhaul alternators, including replacement of coils, resistors and diode plates
Test alternators using test bench
Carrying out of preventive and predictive maintenance
Excellent knowledge of hydraulic, mechanical and electrical trouble shooting.
Reduced repair time with efficient diagnostic testing and identification of electrical malfunctions.
Maintained a high level of expertise in current automotive technology, staying up-to-date on industry trends and advancements.
Streamlined repair processes by maintaining well-organized workspaces, tools, and equipment inventory for optimal efficiency.
Maintenance Planner
African Mining Services (AMS) Limited
2012.01 - 2013.01
- Input client information into spreadsheets and company database to provide leaders with quick access to essential client data
Maintained quality levels above prescribed minimums to support team productivity and efficiency
Entered data into spreadsheets, documents and databases, maintaining 90% accuracy rate
Researched maintenance planning trends and practices and implemented modern techniques in maximizing plant and machinery uptime
Inspected equipment every PM, dairy inspection, identified upcoming maintenance, repair or replacement needs and maintained frequently used parts inventory
Wrote, maintained and distributed standards for predictive and preventive maintenance for industrial machines and equipment
Analyzed upcoming production schedules in light of availability and working condition of plant equipment and reported pressing needs to management
Observed and maintained KPIs, including property and vehicle cleanliness and preventative maintenance schedules to ensure on-time, under-budget project completion.
Reduced downtime for critical assets by developing and implementing comprehensive maintenance plans.
Conducted risk assessments on critical assets to prioritize required maintenance activities accordingly.
Managed inventory levels effectively, ensuring optimal stock availability for essential maintenance items.
Enhanced asset life cycle with thorough analysis of equipment history, failure modes, and cost factors.
Mechanical Technician Gold Process Plant
Central African Gold Ghana Limited
2007.06 - 2007.08
- Performed root cause analysis of problems, documented faults in tracking system and generated daily reports
- Inspected and tested machinery, equipment and component parts to identify defects, diagnose malfunctions and facilitate repairs
- Installed, fit, cleaned and repaired external and internal equipment on tanks, including valves, caps, hoses, pumps
- Troubleshot, diagnosed and repaired engineering equipment diagnosed mechanical problems and determined solutions to correct concerns
- Created agendas and communication materials for team meetings.
Machinist Technician (industrial Attachment)
Ghana Bauxite Company Limited
2005.07 - 2005.09
- Operating of Lathe machine, milling machine, Shaping machine and other machines
Bench fitting works or fabrication works
Basic Arc welding working as signed
Joined inspected team for conveyer inspections.
Enhanced production efficiency by setting up, adjusting, and operating various machines according to specifications.
Reduced waste and increased material utilization with precise measurement and cutting techniques.
Education
MSc - Engineering Management
University of Mines and Technology
Tarkwa Ghana 11.2023
Surface and Underground Mining Operations -
UMaT Tarkwa
01.2021
Energy Audit -
UMaT Tarkwa
01.2020
Occupational Safety and health oil and Gas professionals - Occasionally Safety And Health Manager
Osha UK
UK11.2019
Project Management -
UMaT Tarkwa
01.2019
Occupational Safety and Health Manager -
OSHAassociation UK
01.2019
Effective Supervision And Management -
UMaT Tarkwa
01.2018
Bsc - Mechanical Engineering
Kwame Nkrumah University Of Science And Technology
01.2017
Automobile Electrical And Electronic Engineering -
University of Mines and Technology
01.2014
Mechanical Engineering Technician -
Kumasi Technical University (Polytechnic)
01.2006
Associate of Applied Science - Mechanical Engineering Crafts Practices
Asuansi Technical Institute
Cape Coast Ghana08.2002
Skills
- Multi-tasking professional
- Leadership
- Data analysis
- Safety and Environmental Management
- Maintenance management heavy-duty equipment.
- Total productivity maintenance (TPM)
- Quality Control (ISO 9001) management
- Compute skills (MS Excel, MS Word, Microsoft project, Pulse, Pronto, etc)
- Caterpillar Electronic Technician (CAT ET)
- Electrical and hydraulic diagnose
- Caterpillar Service Information System (SIS)
- Specialist in Automobile Air Condition repair and installation
- CAN Bus Systems
- Advanced Diagnostics
Languages
English
Akan
Industrial Experience
- Underground machine
- Loades CAT R2900G, and Sanvik LH621i
- Drilling Machine, Sanvik Solo DL420, DL421, ITH
- Others, Titan BEC100, Vovlo F150l IT, Telehandler, Grader 14M etc
- Surface Operation
- Rig Drilling Machine, Sanvik1500DP, Rock Commander, Atlas DML45, Schramm T450, 680
- Excavator, Liebheer R9250, R9100C, R 9150, R944, R964C, R984B, R994B, Cat 330, CAT 6018, 330, 320, Komatsu PC2000, PC4000
- Dump Truck, CAT 777f @ 777G, 777D, Graders CAT 16M, 12M & 16H, Dozers CAT D8R, D9R, Wheel Loader CAT 992K, 992G, 980H, 966H, 966G, 988H, 962H, etc.
- Toyota Land cruiser, Pickups, Toyota PC, Volvo FM, Pumps, lighten Plants (Atlas Corpo, Allight, Mobile light,) mobile Compressor from Atlas and power Generate plant from CAT, and others.
Courses Train
- 2022, Sandvik and RCT remote control for operation for maintenance
- 2021, LH 62i Underground SANDVIK Loader.
- 2021, RCT Remote installation on R2900 CAT Loader
- May 2012, Vital Information Monitoring System (VIMS) training.
- 2011, Cat Electronic Technician (Cat ET) Service Information System (SIS)
- 2020, 2016, First Aid St by John Ambulance Ghana
- October 2019, Technical Training on Atlas DML45 rig machine
- July 2018, Equipment Move and Test operation by Inspectorate Division of Minerals Commission of Ghana - Takoradi
- October 2017, Fundamentals of Lubrication and oil Analysis report interpretation by Wear Check Ghana, Tarkwa
- October 2016, Safe Working at Heights by Emergency Training Solution (ES) South Africa
- August 2012, Material Handling (UK) by Agyle Safety Training
Organizations
- OSHAssociation UK. - Ghana Region
- St John of God Society - Ghana
Personal Information
Auto Electrical and Electronic Technician (Heavy-duty mining equipment)
Maintenance Engineer
References
- Adnan Ibrahim, Maint. Shift Supervisor, Chirano Gold Mines Ltd, 0556549052, Adinan.ibrahim@chiranogold.com
- Theophilus Bartels, Shift Supervisor, Chirano Gold Mines Limited, 0244635539, Bartels.theophilus@gmail.com
- Jonas Quartey, Coordinator, OSHAssociation UK, 0243026400, jonas@oshassociation.org
- Derrick Addea, Safety officer, AMS Ghana Ltd / Amax Limited, 0243608123, daddae@amaxgh.com
Volunteer Experience
- Polo immunization of child – Ghana Health Service Bibiani Municipality.
- Faith bases organization (FBO) for HIV AIDS prevent and controlling
Software
Microsoft project
Microsoft office
Proto
Auto card
CAT ET, SIS, VIMS
Work Availability
monday
tuesday
wednesday
thursday
friday
saturday
sunday
morning
afternoon
evening
swipe to browse
Timeline
Underground Auto Electrician (HMUE) + Maintenance Safety Rep.
KINROSS Chirano Gold Mines Limited
2021.01 - Current
Leading Hands (Rigs) Auto Electrician (HME) + Safety |Representative
African Mining Services (AMS) Limited
2015.01 - 2021.01
Maintenance Planner
African Mining Services (AMS) Limited
2012.01 - 2013.01
Health and Safety Representative
African Mining Services, AMS
2011.01 - 2021.01
Mechanical Technician Gold Process Plant
Central African Gold Ghana Limited
2007.06 - 2007.08
Machinist Technician (industrial Attachment)
Ghana Bauxite Company Limited
2005.07 - 2005.09
MSc - Engineering Management
University of Mines and Technology
Surface and Underground Mining Operations -
UMaT Tarkwa
Energy Audit -
UMaT Tarkwa
Occupational Safety and health oil and Gas professionals - Occasionally Safety And Health Manager
Osha UK
Project Management -
UMaT Tarkwa
Occupational Safety and Health Manager -
OSHAassociation UK
Effective Supervision And Management -
UMaT Tarkwa
Bsc - Mechanical Engineering
Kwame Nkrumah University Of Science And Technology
Automobile Electrical And Electronic Engineering -
University of Mines and Technology
Mechanical Engineering Technician -
Kumasi Technical University (Polytechnic)
Associate of Applied Science - Mechanical Engineering Crafts Practices
Asuansi Technical Institute
Certification
- EHS - Environmental Health and Safety Professional
Similar Profiles
EMMANUEL ABOTAREMMANUEL ABOTAR
Lecturer at University of Mines and TechnologyLecturer at University of Mines and Technology
Ferdinand Kofi Ackun. BSc CTM, MSc. DMFerdinand Kofi Ackun. BSc CTM, MSc. DM
Infrastructure and Projects Engineer at Chirano Gold Mines Limited, KINROSSInfrastructure and Projects Engineer at Chirano Gold Mines Limited, KINROSS
PHILIP ANDOHPHILIP ANDOH
Industrial Attachment at Chirano Gold Mines LimitedIndustrial Attachment at Chirano Gold Mines Limited